| |
|
|
Log roll the patient onto the lifting sling and attach sling to the lifting bar.
Position the lift appropriately
for lift and transfer and lock the rear casters.
|
|
|
Extend and spread legs,
using your handset.
Simply press the "up" button and the patient is slowly lifted from the bed.
Press the "rotate" button and the patient is transferred. |
|
|
The corded handset
allows the caregiver to be close to the patient during the lift & transfer.
You need never move the lift. |
|
|
Simply press the "down" button and the patient is slowly lowered into proper position
in a wheelchair or commode.
|
| |
Position LIFTEM for a
normal patient lift and transfer. Position the boom away from the patient and assemble the stretcher sling system. The patient is log rolled onto the fabric stretcher sling.
Rotate the boom so that the stretcher sling system is positioned directly over the patient, making sure the boom is high enough not to interfere with the patient.
Lower the boom and connect the straps of the fabric stretcher sling to the four (4) end hooks on the spreader bar.
Conduct a “Tilt Check” by lifting the patient slightly off the bed so all weight has been transferred to the stretcher lifting system.
| |
Several tilt checks may be necessary until a very minimal tilt of the stretcher lifting system is observed.
In this position the patient is easily transferred to a gurney or bed.
| |
